High Speed Fiberglass Mesh Slitting Rewinding Machine

High Speed Fiberglass Mesh Slitting Rewinding Machine

Higher Speed Fiberglass Mesh Slitting Rewinding Machine

It is specialized in slitting paper and plastic film into modest jumbo roll&comma we can source the width from 800mm to 2800mm equipment&comma it can lower the Max&interval Paper roll width is 2800mm vast and 1500mm diameter&period of time And the Max&period of time Unwinding&solrewinding diameter is 1500mm&interval

Technical specs&colon
1&period of time It adopts Siemens PLC management method and contact monitor&comma all the doing work parameters can be shown on the control panel then the equipment will automatic function&time period
2&period of time It adopts two sets of Yaskawa frequency inverter from Japan to make functioning equipment a lot more stable&interval
3&interval It adopts two sets of Siemens inverter motor&time period
four&time period It adopts 3 sets totally automatic rigidity control to give the continuous rigidity to the finish&period of time
5&period of time Automatic carry-up loading program for large jumbo roll loading&period
six&period A set of photocell monitoring technique imported from Germany&time period
seven&period Computerized meter counter to end the device when it reach the pre-set duration&period of time
eight&period Air Blower and blower pipe for trimming the squander edge&time period

Requirements
Class Computerized Shaftless & Coreless Paper Slitter Machine
Application Substance Typical Papers,Kraft Paper, Bond Paper, Paper Board,Non-woven Fabric, Movie, Aluminum Foil, CZPT Sheet and many others.
Relevant Width of Axial / Materials 600mm ~ 2800mm /23.six-a hundred and ten” (CZPTizable)
Min. Width of Slitting 10mm (Relying on types of resource substance are applied)
Max.Machine Velocity 300m/min (Depending on sorts of substance used)
Max.Unwinding Diameter 1500mm /fifty nine”
Max.Rewinding Diameter 1500mm(CZPTizable)
Tolerance of Slitting Width ±0.15mm(Based on types of materials utilized)
Max Relevant Weight of Content 4000 Kg (CZPTizable)
Rated Frequency 50Hz & 60Hz
Rated Voltage 380V,415V, 440V, 460V, 480V,or Dual-Voltage (CZPTizable)
Unwinding/Rewinding Shaft Shaftless unwinder & Pneumatic Air Increasing Shaft
All round Dimensions 2000 x 2500 x 1500mm
Fat 4000kg

 

Environmental Restriction
Area Indoor. The merchandise need to be installed   on flat and solid basis.
Voltage Regulation ±10%
Frequency Regulation ±5%
Ambient Temperature -5°C~40°C
Altitude Not exceed a thousand Meters
Relative Humidity Less than 85% RH (Non-Condensation)

 

Parts
Unwinding Section -Shaftless unwinder,the cam dimensions is 3”&6” 
-CZPT computerized lift-up loading method
-Tech Mach analog EPC from United states of america
-RE Brake from Italy
-Tech Mach Floating roller continual rigidity from Usa
-Tech Mach Sensor from United states of america
-Self expandable chuck
-Xihu (West Lake) Dis. & Slide AMT from ZheJiang
Slitting Part -Choices of Razor cutter or Disc cutter
-Disc Cutter Assembly adopt the cam self-locking
-Cutter with adjustable and moveable blade base.
-Meter counter
Rewinding Part -three”air increasing rewinding corelessshafts
-Center Rewinding technology
-Stress roller
-Electromagnetic Clutch from ZheJiang
Controlling Section -Siemens PLC & HMI from Germany
-All the parametersare exhibited on the keep track of
-Lower voltage electrical appliances all from Schneider
Trimmed Squander Edge -Edge Waste Blower with Expulsion Tube
Optional -Friction Differential Shaft for rewinding.
-Security guard for the slitting gadget.
-Unexpected emergency Switches on the 4 corner of machine.

 

Configuration
Name Design Parts Remark
Computer Technique PLC(Siemens)+4DA+7”Touch Display(ZheJiang )+
Synchronic(Korea)
1Set Siemens+ Weinview
 Motor   two Sets FUKUTA From ZheJiang
Frequency Inverter   2 Sets YASKAWA From Japan
Higher/Reduce Round Knife   ten Sets Jota CZPT
Brake     RE Brake from Italy
Sensor   2 Sets Tech Mach Sensor from Usa
Stress handle   3 Sets Tech Mach Floating roller consistent rigidity from United states
EPC   one Established Tech Mach analog from United states
Chuck Self expandable chuck 1 Set From ZheJiang
Photocell Tracking   2 Set SIKC From Germany
Magnetic Clutch   two Sets From ZheJiang
Minimal Voltage CZPTal Switch     SCHNEIDER
Blower   1 Established China

High Speed Fiberglass Mesh Slitting Rewinding Machine