Electric Brush Motor 250kw Z4 DC Motor

Electric Brush Motor 250kw Z4 DC Motor

Product Description:
 
DC motor is a rotating motor that can convert DC electrical strength into mechanical energy (DC motor) or mechanical energy into DC electric energy (DC generator). It is a motor that can convert DC and mechanical power into one particular yet another. When it operates as a motor, it is a direct present motor, which converts electrical energy into mechanical power when it operates as a generator, it is a direct current generator, which converts mechanical vitality into electrical power.
 

Product Identify CZPT Brush Motor 250KW Z4 DC Motor
Motor Type DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition construction The framework of DC motor must consist of two elements: stator and rotor. The static element of DC motor is referred to as stator. The main perform of stator is to generate magnetic area, which is composed of foundation, principal magnetic pole, commutation pole, finish cap, bearing and brush device. Running part is referred to as rotor, whose major perform is to create electromagnetic torque and inductive electromotive power. It is the hub of vitality conversion of DC motor. So it is also typically named armature, which consists of rotor, armature core, armature winding, commutator and admirer.
Model Z Type
Seat amount Z315-Z1000
energy sixty~2800kW
Voltage 220~1000V
Torque variety 1.5 ~180kNm
Safety level IP23, IP44
Cooling mode IC06,IC17,IC37,IC81W
Running pace  Constant Pace /Minimal Speed /Change Pace /Large Speed Other 
Main classification DC Motor is a equipment that converts mechanical strength into DC energy. It is primarily employed as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electricity offer of alternator. Even though in places in which DC energy is essential, AC power rectifier is also utilized to change AC into DC energy, but from some facets of functionality, AC rectifier power source can not fully substitute DC generator.  
Application DC motors are commonly employed in tape recorders, movie recorders, movie discs, electrical shavers, hair dryers, electronic watches, toys and so on.
Servicing method Expert motor upkeep middle motor maintenance approach: cleaning stator and rotor – changing carbon brush or other components – vacuum F pressure dipping paint – drying – Calibration harmony.
1. Use surroundings need to be often dry, motor surface must be held clean, air consumption must not be hindered by dust, fibers and other road blocks.
2. When the thermal defense of the motor carries on to operate, it ought to be ascertained no matter whether the fault will come from the motor or the overload or the placing worth of the protecting unit is way too reduced. Following reducing the fault, it can be put into procedure.
three, make certain that the motor is properly lubricated during procedure. The general motor runs for about 5000 several hours, that is to say, lubricating grease must be extra or changed. When bearing overheating or lubricating deterioration is discovered in procedure, the hydraulic stress must adjust lubricating grease in time. When changing grease, the previous grease need to be removed, and the oil groove of bearing and bearing go over ought to be washed with gasoline. Then ZL-three lithium grease must be crammed with 1/2 (2 poles) and two/three (four poles, 6 poles and eight poles) of the cavity amongst the inner and outer rings of the bearing.
4. When the life of the bearing is more than, the vibration and sound of the motor will enhance obviously. When the radial clearance of the bearing reaches the following price, the bearing should be replaced.
five, when taking away the motor, it is Okay to eliminate the rotor from the shaft extension or the non extension stop. If it is not required to unload the fan, it is much more convenient to take out the rotor from the non-axle extension stop. When pulling out the rotor from the stator, the stator winding or insulation should be prevented from getting damaged.
six. When changing the windings, the kind, dimensions, turns and gauges of the original windings have to be recorded. When these info are dropped, they ought to be obtained from the manufacturer and the authentic made windings must be changed at will, which frequently deteriorates one particular or several performance of the motor or even helps make it unattainable to use them.

 

 

Electric Brush Motor 250kw Z4 DC Motor