China 12V 24V Electric DC Planetary Brush Geared Motor with ISO motor armature

Product Description

high top quality 12/24v dc motor industrial
 

S370 series                
                 
Standard Industry                
Products for market and commerce uses motor              
Software                
Compact disk player,household appliances,kitchen appliance,Sphygmomanometer      
Main Technical Parameters                
Vol: 4.5-24V DC                
Rated Speed:2000-25000RPM              
Rated Enter Power: <300W              
Insulation Class: A B F H              
                 
Merchandise code voltage NO load  at highest stall
    velocity(RPM) Existing(A) speed(RPM) Existing(A) torque(gf.com) output(w) torque(gf.com)
S370-12560 12V 3700 .017 3000 .09 twenty .sixty two one hundred twenty five
S370-13350 9V 4200 .571 3600 .11 15 .55 112
S370-15370 24V 5600 .571 4820 .15 26 one.3 186

 

ABOUT US

Greatupmotor team was established up in 2006.we often focus on micro-motors for house electrical appliance and market appliance given that setting up.currently we have 2 specialist micro-motor factories in China  which severally found in HangZhou town and HangZhou metropolis.it has an spot of twenty five,000 sq. meters crops and far more than 300 staff, annual output  is 3 million pcs and has 5 million pcs yearly generating capacity.after many a long time development,we had constructed a excellent status in the marketplace and acquired a lot more and more customers’  trust in the planet.
We  began from shaded pole motors  at commencing, up to now,our solution  included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our item  are broadly employed for creating fridges, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, therapeutic massage machines and a lot of other equipments.
As a realiable quality warranty,Ritscher has comprehensive R&D departement,QC department,generating office,purchase office and so forth. has perfect producing equipment like Aluminum diecasting, Zinc diecasting, Sheet metallic stamping, Plastic injection molding and so forth. also take a look at/ detection system like multiplex temp measuring unit, efficiency parameter inspection device, Phenol peptide remedy pinhole tester,Anechoic area and so forth.
 
Endeavoring to supply the best product and service to clients,we often do the most effort to become an outstanding producer of micro motors.
Ritscher is usually willing to build sincere company partnership with close friends from all over the planet.
Welcome get in touch with with us!
 
Just take Greatupmotor ,enjoy modern day lifestyle!

Our business FAQ for you

(1) Q: What sort motors you can provide?
A:For now,we primarily offer Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Fridge Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so on.

(2) Q: Is it feasible to pay a visit to your manufacturing unit
A: Sure. But please kindly keep us posted a couple of days in advance. We need to have to check our
plan to see if we are accessible then.

(3) Q: Can I get some samples
A: It is dependent. If only a handful of samples for personalized use or substitute, I am afraid it will
be difficult for us to offer, because all of our motors are custom made and no inventory
obtainable if there is no further demands. If just sample testing ahead of the formal get and
our MOQ, cost and other conditions are suitable, we’d enjoy to offer samples.

(4) Q: Is there a MOQ for your motors?
A: Sure. The MOQ is in between a thousand~ten,000pcs for various designs after sample acceptance.
But it really is also all right for us to take scaled-down heaps like a handful of dozens, hundreds or 1000’s
For the original 3 orders after sample acceptance.For samples, there is no MOQ necessity. But the much less the far better (like no much more than 5pcs) on situation that the amount is sufficient in case any adjustments required soon after first testing.

 

US $0.3-0.5
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Automation Equipment, Audio and Video Equipment, Moving Machinery
Operating Speed: Adjust Speed
Power Source: DC Motor
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 2

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

S370 series                
                 
Typical Market                
Products for industry and commerce uses motor              
Application                
Compact disk player,household appliances,kitchen appliance,Sphygmomanometer      
Main Technical Parameters                
Vol: 4.5-24V DC                
Rated Speed:2000-25000RPM              
Rated Input Power: <300W              
Insulation Class: A B F H              
                 
Products code voltage NO load  at maximum stall
    speed(RPM) Current(A) speed(RPM) Current(A) torque(gf.com) output(w) torque(gf.com)
S370-12560 12V 3700 0.017 3000 0.09 20 0.62 125
S370-13350 9V 4200 0.025 3600 0.11 15 0.55 112
S370-15370 24V 5600 0.025 4820 0.15 26 1.3 186
US $0.3-0.5
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Automation Equipment, Audio and Video Equipment, Moving Machinery
Operating Speed: Adjust Speed
Power Source: DC Motor
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 2

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

S370 series                
                 
Typical Market                
Products for industry and commerce uses motor              
Application                
Compact disk player,household appliances,kitchen appliance,Sphygmomanometer      
Main Technical Parameters                
Vol: 4.5-24V DC                
Rated Speed:2000-25000RPM              
Rated Input Power: <300W              
Insulation Class: A B F H              
                 
Products code voltage NO load  at maximum stall
    speed(RPM) Current(A) speed(RPM) Current(A) torque(gf.com) output(w) torque(gf.com)
S370-12560 12V 3700 0.017 3000 0.09 20 0.62 125
S370-13350 9V 4200 0.025 3600 0.11 15 0.55 112
S370-15370 24V 5600 0.025 4820 0.15 26 1.3 186

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China 12V 24V Electric DC Planetary Brush Geared Motor with ISO     motor armatureChina 12V 24V Electric DC Planetary Brush Geared Motor with ISO     motor armature
editor by czh 2023-01-19