China 12V 24V 36V 48V 60rpm 15nm 100W Planetary Gear Brushless DC Motor 200 Rpm supplier

Solution Description

Product Description

Attribute: 

A. High energy assortment from 75W to 15KW
B. Dia: 57mm-180mm
C. Straightforward for pace & route adjustment
D. Prosperous stock and rapidly delivery time in 10 functioning times
E. Robust balance for driver/controller
F. Life time previously mentioned ongoing ten thousand hours
G. IP65 protection rank is offered for us
H. Over 90% enery efficiency motor is available
I. 3D file is accessible if consumers required
K.Higher-functionality and stable matching driver and controller

Δ Kindly remind: As diverse clients may need to have different motor parameter for fitting your tools. If below motor are unable to match your need, make sure you kindly send inquiry to us with data for rated energy or torque,rated speed, and rated voltage for our new dimensions drawing creating for you. Click on Below to get in touch with me. Thanks a whole lot!

Dimensions (Unit: mm )
Mounting screws are included with gear head.

Gearbox Specification:

Gearbox Type

PLF60/PLE60

ZPLF60/ZPLE60

Deceleration stage

one

2

3

one

2

three

Size

119

135

151

129.five

161

177

Reduction ratio

Stage 1: 3, 4, 5, 7, ten
Level 2: sixteen, 20, twenty five, 28, 35, 40, 70
Degree 3: 64, eighty, one hundred, a hundred twenty five, one hundred forty, a hundred seventy five, 200, 250

57mm 100W BLDC motor with PLF60/PLE60 Planetary Gearbox  

Other Specification Kind: 

Δ Motor interface, Voltage, Velocity can be custom-made.

For More Details Of Product Technical specs,
Remember to Click on below speak to us for up-to-date size drawing if you have other diverse parameter required. Many thanks

A lot more Motor Flange Dimension

Δ Far more Motor Flange Dimension to select, if you need to have other dimensions. Welcome to get in touch with us to custom made.

BLDC Motor with Gearbox Range

Company Profile

DMKE motor was founded in China, HangZhou metropolis,Xihu (West Lake) Dis. district, in 2009. After twelve years’ creativity and development, we turned 1 of the top higher-tech organizations in China in dc motor market.

We specialize in higher precision micro dc gear motors, brushless motors, brushless controllers, dc servo motors, dc servo controllers and so forth. And we make brushless dc motor and controller with wide electricity variety from 5 watt to 20 kilowatt also dc servo motor energy variety from fifty watt to 10 kilowatt. They are commonly used in automated guided automobile , robots, lifting equipment,cleansing equipment, health care gear, packing equipment, and many other industrial automated equipments.

With a plant location of 4000 square meters, we have created our possess provide chain with large good quality control regular and passed ISO9001 certificate of high quality method.

With far more than 10 engineers for brushless dc motor and controllers’ investigation and advancement, we own powerful independent layout and improvement ability. Custom-produced motors and controllers are commonly accepted by us. At the identical time, we have engineers who can talk fluent English. That helps make we can offer intime following-income support and direction smoothly for our buyers.

Our motors are exported worldwide, and more than eighty% motors are exported to Europe, the United States, Saudi Arabia, Australia, Korea and so forth. We are hunting forward to developing lengthy-time period organization connection together with you for mutual company good results.

FAQ

Q1: What type motors you can supply?
A1: For now, we largely offer permanent magnet brushless dc motor, dc equipment motor, micro dc motor, planetary equipment motor, dc servo motor, brush dc motors, with diameter variety from 16 to 220mm,and power assortment from 5W to 20KW.

Q2: Is there a MOQ for your motors?
A2: No. we can settle for 1 pcs for sample creating for your tests,and the value for sample producing will have ten% to thirty% difference than bulk price tag based mostly on distinct fashion.

Q3: Could you deliver me a value list?
A3: For all of our motors, they are tailored based on diverse demands like electricity, voltage, gear ratio, rated torque and shaft diameter and so on. The cost also varies in accordance to distinct get qty. So it really is difficult for us to supply a price tag listing.
If you can share your detailed specification and buy qty, we are going to see what offer we can give.

This autumn: Are you motors reversible?
A4: Of course, almost all dc and ac motor are reversible. We have specialized men and women who can educate how to get the function by different wire connection.

Q5: Is it feasible for you to develop new motors if we give the tooling price?
A5: Yes. Make sure you kindly share the detailed specifications like efficiency, dimension, annual amount, target price tag and many others. Then we will make our analysis to see if we can set up or not.

Q6:How about your shipping and delivery time?
A6: For micro brush dc equipment motor, the sample supply time is 2-5 days, bulk shipping time is about 15-20 times, relies upon on the order qty.
For brushless dc motor, the sample supply time is about ten-fifteen days bulk time is 15-twenty days.
Pleasecontact us for final reference.

Q7:What’s your guarantee conditions?
A6: One 12 months

Application: Universal, Industrial, Household Appliances, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Compound
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 8

###

Samples:
US$ 768/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Gearbox Type
PLF60/PLE60
ZPLF60/ZPLE60
Deceleration stage
1
2
3
1
2
3
Length
119
135
151
129.5
161
177
Reduction ratio
Level 1: 3, 4, 5, 7, 10
Level 2: 16, 20, 25, 28, 35, 40, 70
Level 3: 64, 80, 100, 125, 140, 175, 200, 250
Application: Universal, Industrial, Household Appliances, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Compound
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 8

###

Samples:
US$ 768/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Gearbox Type
PLF60/PLE60
ZPLF60/ZPLE60
Deceleration stage
1
2
3
1
2
3
Length
119
135
151
129.5
161
177
Reduction ratio
Level 1: 3, 4, 5, 7, 10
Level 2: 16, 20, 25, 28, 35, 40, 70
Level 3: 64, 80, 100, 125, 140, 175, 200, 250

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China 12V 24V 36V 48V 60rpm 15nm 100W Planetary Gear Brushless DC Motor 200 Rpm     supplier China 12V 24V 36V 48V 60rpm 15nm 100W Planetary Gear Brushless DC Motor 200 Rpm     supplier
editor by czh 2022-12-23