China 12V 22mm Low Rpm DC Motor with Planetary Gearbox for Sliding Gate motor electric

Product Description

SDM-10G32/SDM-20G32 Encryption Sliding Gate Motor General Introduction:
In purchase to make the set up and configuration simpler, we have produced this intelligent 1 button learning sliding door handle board. The control board adopts advanced microcomputer chip, electronic control, far more useful functions, higher protection functionality, less difficult set up and configuration. Entirely appropriate with the smartphone application community (WiFi/3G/4G/5G) manage and bluetooth management and many other functions.

Functions:
one.  Anti-rush style. At the very first operation soon after each energy on, the motor runs in slow motion to the restrict point throughout the method to avoid speeding out of the limit. When the door reaches the limit level, the motor can only be operated by urgent the button of the opposite path to avoid the limit from being broken out. (Recognize: It has the electricity off safety purpose when in spot, and the motor only moves in the opposite path when repowered).
two. Master-slave method accessible. Two motors with the same management board on every can operate synchronously. In this mode, infrared, ground sense, automated doorway near and other capabilities are synchronized. Attention:Infrared, floor feeling have to be connected to the learn motor.
3. Motor runtime security. To avert the motor from running during the journey failure, the management board will routinely find out the motor operating time with out handbook environment, and 10s will be additional immediately as the time margin.
four. Car-close operate. Time can be set from 1s to 250s prior to the doorway closes automatically. The default worth is 3s.
5. Gentle commence and sluggish cease. There’re soft begin and sluggish quit features available. The length and pace of the slow stop function can be modified.
six. Quit & rebound towards resistance. Switchable among stop in opposition to resistance and rebound from resistance for the closing journey. End from resistance for the opening travle.
7. Onboard socket for bluetooth module. A socket is built-in onboard for the insertion of the standalone bluetooth module (module not provided by default).
eight. 1 button configuration for net manage. Can be directly paired with the world wide web controllers by means of pressing 1 button onboard, no copy process is required.

Merchandise Parameters:

Doing work voltage DC24V output
Max output present 10A
Fuse AC220 20A
Remote Length 30m
Distant control 2pcs anti-duplicate rolling code remotes 
Doing work temp -25ºC to +75ºC
Max gate bodyweight 1000kg
Output Torque 21N.m
Rotation Velocity 12m/min
Restrict Swap Magnetic(NC/NO) Spring 
Sound less than 50dB
Cellular Application with WIFI or Bluetooth
Charger electrical power battery 24V3A charger electricity battery(not contain) 
Encryption Remote Frequency  433MHZ

Diagram:

Configuration Introduction:
Dip Swap : Remote Control One-essential and 4-important Modes Switch
OFF placement: Distant management with 4 impartial keys working as Open up, Near, Stop, Lock.
When in the non-passageway manner, after pressing the Lock important, the Quit essential requirements to be pressed in prior to currently being CZPT to run.
ON placement:
(1) A solitary essential on the remote is the one-crucial manage important (The certain important pressed although pairing).
(2) Each and every essential on the remote is a one particular-important handle key.
Function environment: Flip and only change and to ON, push Set once with a buzzer is the single important one-crucial method, push again with 4 buzzers is the 4 keys one particular-essential manner. Turn to OFF after location.

Dip Swap : Passageway Mode
OFF Position: Enable the Lock button on the remote. (Refer to Remote Control Pairing on Page 4)
ON Position: Permit the passageway method ( at OFF, at ON).
When the gate is shut at the limit placement, press the Lock important will make the motor run in the opening motion for 6s.

Dip Swap : Vehicle-near
OFF Position: Disable the car-close function.
ON Place: Permit the vehicle-close funciton. Only when the gate is opened at the limit place will the countdown starts, then the gate will routinely shut to the limit placement.
Vehicle-shut timer setting: Flip and only turn and to ON, each and every push on the Established essential is 1s, set it as long as you desire up to 250s. Soon after placing, switch to OFF.

Dip Swap : Slow End
OFF Placement: Disable the slow quit function.
ON Placement: Empower the gradual cease operate (Powerful only following journey length studying).
The speed of Gradual Stop can be modified with the MT adjustor, change it clockwise to achieve the speed, turn it anti-clockwise to decrease the speed.
Travel Distance Understanding: Switch and only change and to ON, then keep down the One particular important until finally the gate starts off running auomatically and release. It will shut to the restrict and open up to the limit, and near to the limit again with the slow cease influence. Soon after 2 beeps, the vacation length studying process is total.

Dip Switch : Startup Toughness
OFF Position: Allow the sluggish begin operate. The gate operates at a slower velocity for the initial 2s, to reduce the tremble of the gate.
ON Placement: Max start off velocity. The gate operates at the maximum velocity from the quite beginning.

Dip Swap : Environment Crucial
OFF Situation: Make the settings take result.
ON Position: Enable the setting mode for the One-key perform, Car-shut operate and Sluggish Stop features. When the configurations are established, switch this key to OFF to take influence.

Dip Change : Resistance Cease & Rebound
OFF Position: The gate stops when working to possibly open up or shut.
ON Position: The gate stops towards resistance when working to open. When operating to close, the gate stops against resistance for 1s and then rebound.
Optimized resistance rebound adjustment: Make certain the motor features correctly. Switch on dip swap , then although the motor is in the motion of closing, rotate the Pressure adjustor anticlockwise to let the doorway stops and return instantly, this is the threshold of the resistance pressure, it’s advised to rotate the adjustor clockwise a minor little bit to established it as the closing resistance drive.

Dip Change : Motor Rotation Course Swap
Swap this switch to reverse the rotation direction of the equipment.

Blue Dip Switch : Usually Shut/Open
OFF Situation: Set the motor standing to usually open.
ON Position: Set the motor standing to typically closed.

Blue Dip Swap : Grasp-slave Mode
OFF Postion: Established the recent motor as the master motor.
ON Placement: Set the recent motor as the slave motor.
Learn-slave mode means 2 motors with the identical management board set up on every single function synchronously when the master motor is becoming operated. Hook up 2 motors by way of the 485A+B- interfaces on equally motors in parallel to recognize the learn-slave mode.

Distant Handle Paring and Deletion
Pairing
Maintain down the Examine button on the manage board for about 1s until a buzz, then keep down any crucial of the remote 
management, release it against a excitement, and the pairing method is total. Repeat this step to pair more fobs. 
Up to one hundred twenty remotes can be paired with a one board.
Deletion
Keep down the Research button on the control board for about 7s, release it from 3 ongoing buzzesto delete all 
paired fobs.
P.S.: Right after moving into the pairing condition, if no powerful RF sign is sensed, the board will exit the pairing state 
automatically with a excitement and the LED returning to often on
B.Gatelink Roling Code Learning Strategy
Remote Without Locked Variety (Button No Function)
Push and maintain the “Learn/Delete” button on the GateLink obtaining board for about 1 second,the indicator 
will flip off,can hear the buzzer give a “didi”seem,to remind the consumer launch the button,and then enter into 
remote studying sort, push  and keep the distant transponder any button(open/near/stop),release it after 
heard the buzzer give”didi”audio yet again,studying finished
Remote With Locked Sort(Button With Purpose )
Press and hold the “Find out/Delete” button on the GateLink acquiring board for about 1 second,the indicator 
will change off,can listen to the buzzer give a “didi”seem,to remind the user release the button,and then enter into 
distant learning type,push and maintain the “Lock” button ,launch it right after heard the buzzer give”didi”sound 
yet again,studying finished
If choosed  the wrong method, you can re-discover once more. Repeat this phase to learn multiple remote transponder, 
and the typical model can retailer up to 64 GateLink ID (256 Gatelink ID can be optional also)
LED indicators introduction:

Operate indicator
one. The Operate indicator is always on when driven
two, The Operate indicator flashes after everytime an effective RF sign is sensed
3, When location the timer for car-shut, the Operate indicator flashes after along with a beep in opposition to every press on One
four, When in the Grasp-slave manner, the Run indicator flashes consistently with an interval of 1s
five, When in the car-near countdown state, the Run indicator flashes continuously with an interval of 1s
6, When in the movement of opening, the Operate indicator flashes after for every next
seven, When in the movement of closing, the Operate indicator flashes 5 instances per second

Underneath-V indicator
one, When the voltage of the battery is in between 19 ~ 20V, the Underneath-V indicator is always on
two, When the voltage of the battery is decrease than 19V, the Beneath-V indicator flashes continuously, the board enters the under-voltage condition and will not carry out the motions of neither opening nor closing

BLE indicator
one, When the bluetooth module is not sure, the BLE indicator flashes as soon as for each 2nd continually
2, Following binding, the BLE indicator flashes once for every 2nd when joined with the mobile app, and goes off when the application is give up
three, After keeping down the BLE important for 5s to reset the bluetooth feature, the BLE indicator will keep on

Demand indicator
1, When charging, the purple LED is usually on
two, The purple LED goes off after full charged

Photocell indicator
When triggered, the corresponding crimson LED is on, otherwise it stays off

Stop indicator
When brought on, the corresponding red LED is on, or else it stays off

Manual button indicator
When induced, the corresponding red LED is on, normally it stays off

Closing indicator
When brought on, the corresponding yellow LED is on, normally it stays off

Opening indicator
When triggered, the corresponding green LED is on, in any other case it stays off

Loop indicator
When activated, the corresponding pink LED is on, or else it stays off

Shut limiter indicator
When the gate is shut at the limit placement, the corresponding LED stays on, otherwise it is off

Open up limiter indicator
When the gate is open at the restrict place, the corresponding LED stays on, or else it really is off

Buzzer introduction:
one, A buzz occurs every single time a dip swap is dipped
two, When in the unlocked standing underneath the Lock mode, a excitement takes place when the LOCK button on the distant is pressed indicating the distant is locked. When in the locked statuse, press the End button on the remote leads to 2 buzzes, and the remote is unlocked
3, When the two limit swithes are brought on at the same time, the buzzer keeps buzzing and the motor can’t be operated by any button, in this situation the height of the magnet need to be modified
4, When the gate is at the open up/closed limit position, if the open up/shut button on the distant is pressed, 3 steady buzzes arise and no reaction transpires
five, Quit from resistance when opening will trigger 3 ongoing buzzes, stop/rebound towards resistance when closing will lead to 5 ongoing buzzes

Magnetic restrict change installation information:
Transfer the gate to the best closed position, fix the magnet on the equipment rack at the place the place the restrict swap box is situated and make positive the magnet is dealing with to the box. Do the very same with another magnet for the open placement at the other stop of the racks. Make confident the magnet on the still left is higher and the 1 on the proper is reduce. When at a specific limit position, the corresponding LED indicator on the board will stays on. If the 2 indicators are on at the very same time along with a consistent buzz, the top of the magnet needs to be modified

M-S mode (double equipment synchronized) set up manual:
Relationship:
one, Switch the Grasp/Slave dip switch to ON on the grasp motor. Go away the swap at OFF on the slave motor
2, Join the A+ B- interfaces on the master motor to the corresponding interfaces on the slave motor
Right after connecting, if the Operate indicators on both learn and slave motors flashes synchronouly after per next, it really is properly set. Or else, examine the wire connection or the standing of the dip switches

Capabilities:
1, When the M-S manner is effectively set, the remote controls paired with the slave motor and the Guide button, Study/Delete button on the slave motor are all out of function as well as the Open, Cease, Shut capabilities of any external control devices related with the slave motor
two, When functioning the remotes paired with the master motor, and the Manual button, Review/Delete button on the learn motor as well as the Open, Quit, Near capabilities of any exterior control products linked with the master motor, the slave motor will carry out the identical operations
three, The resistance stop/rebound operate, photocell perform, loop purpose on the two motors can be induced from either motor and have out the corresponding perform on the other at the very same time
4, The vehicle-shut operate of the slave motor is overwritten by the grasp motor, if this perform is supposed to be utilized, switch the Vehicle Near dip switch to ON on the master motor
five, The lower pace price and resistance force can be set on each and every motor independently
six, The limit operate on each and every motor operates individually, it is to be set on either motor ahead of linking

JUTAI Other Items
JUTAI is a manufacturer which built-in with R&D, Production, and Product sales, mostly dealing in loop detectors, photocell beams, safety light curtains, Card audience, accessibility management, remote control, visitors light-weight, barrier gate, and gate opener, gate automation program,s, and parking management system.


/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Lifetime Maintenance
Warranty: 1 Year
Material: Aluminum Alloy
Type: Sliding
Open Style: Sliding
Opening Type: With Remote Control

###

Samples:
US$ 245/Piece
1 Piece(Min.Order)

|
Request Sample

1000kg gate motor with 24DC

###

Customization:
Available

|


###

Working voltage DC24V output
Max output current 10A
Fuse AC220 20A
Remote Distance 30m
Remote control 2pcs anti-copy rolling code remotes 
Working temp -25ºC to +75ºC
Max gate weight 1000kg
Output Torque 21N.m
Rotation Speed 12m/min
Limit Switch Magnetic(NC/NO) Spring 
Noise less than 50dB
Mobile APP with WIFI or Bluetooth
Charger power battery 24V3A charger power battery(not include) 
Encryption Remote Frequency  433MHZ

/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Lifetime Maintenance
Warranty: 1 Year
Material: Aluminum Alloy
Type: Sliding
Open Style: Sliding
Opening Type: With Remote Control

###

Samples:
US$ 245/Piece
1 Piece(Min.Order)

|
Request Sample

1000kg gate motor with 24DC

###

Customization:
Available

|


###

Working voltage DC24V output
Max output current 10A
Fuse AC220 20A
Remote Distance 30m
Remote control 2pcs anti-copy rolling code remotes 
Working temp -25ºC to +75ºC
Max gate weight 1000kg
Output Torque 21N.m
Rotation Speed 12m/min
Limit Switch Magnetic(NC/NO) Spring 
Noise less than 50dB
Mobile APP with WIFI or Bluetooth
Charger power battery 24V3A charger power battery(not include) 
Encryption Remote Frequency  433MHZ

How to Maximize Gear Motor Reliability

A gearmotor is a mechanical device used to transmit torque from one location to another. As its name implies, it is designed to rotate one object relative to another. Its main use is to transmit torque from one point to another. The most common types of gear motors are: worm, spur, and helical. Each of these has specific functions and can be used for a variety of applications. Reliability is also an important factor to consider when choosing a gearmotor.

Applications of a gear motor

Despite its small size, a gear motor has many applications. These include heavy machinery lifts, hospital beds, and power recliners. It is also found in many everyday products, such as electromechanical clocks and cake mixers. Its versatility allows it to produce a high force from a small electric motor. Here are some of its most common uses. You can also find a gear motor in many household appliances and vehicles.
Before selecting a gearmotor, consider the specifications of the machine you need to power. You should consider its size, weight, and ambient conditions, which include temperature regimes, noise levels, and contaminating sources. You should also take into account the envelope size, mounting method, and orientation. Other considerations include the expected service life, maintenance scope, and control type. The most suitable gearmotor for your specific application will be one that can handle the load.
The motor and gearbox types can be mixed and matched, depending on the application. A three-phase asynchronous motor and a permanent magnet synchronous servomotor are common choices for these devices. The type of motor and gearbox combination you choose will determine the power supply, the efficiency of the motor, and cost. Once you understand the application, it will be easy to integrate a gear motor into your system.
When used in industrial applications, gear motors are effective for reducing the speed of rotating shafts. One third of all industrial electric motor systems use gearing to reduce output speed. They can also save energy, which benefits the workers who operate them. In fact, industrial electric motor systems are responsible for nearly one-tenth of the carbon dioxide emissions that are produced by fossil-fueled power plants. Fortunately, efficiency and reliability are just two of the benefits of using gear motors.
Motor

Types

Before choosing a gearmotor, it is important to understand its specifications. The key factors to consider are the size, weight, and noise level of the gearmotor. Additionally, the power, torque, and speed of the motor are important factors. Specifications are also important for its operating environment, such as the temperature and the level of ingress protection. Finally, it is important to determine its duty cycle to ensure it will operate properly. To choose a suitable gearmotor, consult the specifications of your application.
Some common applications of gearmotors include packaging equipment, conveyors, and material handling applications. They also come with several advantages, including their ability to control both position and speed. This makes them ideal for applications where speed and positioning are crucial. Parallel-shaft gear units, for instance, are commonly used in conveyors, material handling, and steel mills. They are also able to operate in high-precision manufacturing. For these reasons, they are the most popular type of gearmotor.
There are three common types of gears. Helical gears have teeth that are inclined at 90 degrees to the axis of rotation, making them more efficient. Helicoidal gears, meanwhile, have a lower noise level and are therefore preferred for applications requiring high torque. Worm gears are preferred for applications where torque and speed reduction are important, and worm gears are suited for those conditions. They also have advantages over spur gears and worm gears.
The application of a gear motor is almost limitless. From heavy machine lifts to hospital bed lifting mechanisms, gear motors make it possible to use a small rotor at a high speed. Their lightweight construction also allows them to move heavy loads, such as cranes, but they do so slowly. Gear motors are an excellent choice in applications where space is an issue. A few common applications are discussed below. When choosing a gear motor, remember to choose the best size and application for your needs.
Motor

Functions

A gearmotor’s speed is directly proportional to the gear ratio. By dividing the input speed by the gear ratio, the output speed can be determined. Gear ratios above one reduce speed, while gear ratios below one increase speed. Efficiency of a gearmotor is defined as its ability to transfer energy through its gearbox. This efficiency factor takes into account losses from friction and slippage. Most gearmotor manufacturers will provide this curve upon request.
There are several factors that must be considered when choosing a gearmotor. First, the application must meet the desired speed and torque. Second, the output shaft must rotate in the desired direction. Third, the load must be properly matched to the gearmotor. Lastly, the operating environment must be considered, including the ambient temperature and the level of protection. These details will help you find the perfect gearmotor. You can compare various types of gear motors on this page and choose the one that will meet your needs.
The micro-DC gear motor is one of the most versatile types of geared motors. These motors are widely used in intelligent automobiles, robotics, logistics, and the smart city. Other applications include precision instruments, personal care tools, and cameras. They are also commonly found in high-end automotives and are used in smart cities. They also find use in many fields including outdoor adventure equipment, photography equipment, and electronics. The benefits of micro-DC gear motors are many.
The main function of a gear motor is to reduce the speed of a rotating shaft. Small electric clocks, for example, use a synchronous motor with a 1,200-rpm output speed to drive the hour, minute, and second hands. While the motor is small, the force it exerts is enormous, so it’s crucial to ensure that the motor isn’t over-powered. There is a high ratio between the input torque and the output torque.

Reliability

The reliability of a gear motor is dependent on a number of factors, including material quality, machining accuracy, and operating conditions. Gear failure is often more serious than surface fatigue, and can compromise personal safety. Reliability is also affected by the conditions of installation, assembly, and usage. The following sections provide an overview of some important factors that impact gear motor reliability. This article provides some tips to maximize gear motor reliability.
First and foremost, make sure you’re buying from a reliable supplier. Gear motors are expensive, and there is no standardization of the sizes. If a gear breaks, replacing it can take a lot of time. In the long run, reliability wins over anything. But this doesn’t mean that you can ignore the importance of gears – the quality of a gear motor is more important than how long it lasts.
Motor

Cost

The cost of a gear motor is relatively low compared to that of other forms of electric motors. This type of motor is commonly used in money counters, printers, smart homes, and automation equipment. A DC gear motor is also commonly used in automatic window machines, glass curtain walls, and banknote vending machines. There are many advantages to using a gear motor. Here are a few of them. Read on to learn more about them.
Speed management is another benefit of a gear motor. The motors tend to have less wear and tear than other motors, which means less frequent replacements. Additionally, many gear motors are easy to install and require less maintenance, which also helps reduce the overall cost of ownership. Lastly, because noise is a common concern for many electronic OEMs, DC gear motors are often quieter than their counterparts. For these reasons, they are often used in industrial settings.
Another advantage of an electric gear motor is its size and power. They are typically designed for 12V, 24V, and 48V voltages and 200-watt power. Their rated speed is 3000 rpm and their torque is 0.64 Nm. They are also more reliable than their AC counterparts and are ideal for many industrial applications. They have a high ratio of three to two, which makes them ideal for a variety of applications.
A gear motor is an electric motor that is coupled with a gear train. It uses AC or DC power, and is often called a gear reducer. The main purpose of these gear reducers is to multiply torque, while maintaining compact size and overall efficiency. However, the efficiency of a gear motor is also affected by ambient temperature and lubricants. If the gear motor is installed in the wrong location, it may be ineffective and result in premature failure of the machine.

China 12V 22mm Low Rpm DC Motor with Planetary Gearbox for Sliding Gate     motor electric	China 12V 22mm Low Rpm DC Motor with Planetary Gearbox for Sliding Gate     motor electric
editor by CX 2023-03-27