Ideal value Fiberglass PVC gravity gear spiral chute
Our manufacturing unit make complete sets mining equipments for separating titanium, chrome, zircon sand, rutile ore, monazite, ilmenite, magnetic iron ore, tin ore and so on .
The equipments contain shaking table, spiral separator, electrostatic separator, magnetic separator, trommel, dryer, ARC plate separator, flotation device…
If you are interested in our equipments, please really feel free of charge to make contact with us!
The equipments contain shaking table, spiral separator, electrostatic separator, magnetic separator, trommel, dryer, ARC plate separator, flotation device…
If you are interested in our equipments, please really feel free of charge to make contact with us!
| Our factory make full sets mining equipments for various minerals separation |
||
| Coltan | Diamond | Zircon sand |
| Tantalum | River sand gold | Titanium |
| Cobalt | Alluvial gold | Tin /Cassiterite |
| Tungsten | Rock stone gold | Heavy minerals sand |
| Tantalite | placer gold | Chromium ore |
| Silica sand | Gold tailing | Monazite |
| Copper | Clay gold mining | Tungsten ore |
| Barite | Desert sand gold | llmenite |
| Chrome | Quartz | Wolfram ore |
| Iron ore | Coal | Niobium |
| Manganese ore | Sand gravel | Rutile |
| Fluorite | Topsoil | Hematite |
Vietnam 500 tons for each hour titanium ore beneficiation project.
Raw ore major contents :
Ilmenite, Rutile, Zircon, Tin, Hematite, Magnetite Iron ore, Quartz, Monazite, Silica sand, and so forth.
CZPTer’ target: get the high grade titanium ore 50% above, in the exact same time, get by-products tin and Zircon, Rutile.
We design and style the processing flowchart as underneath:
one). Use sand pump feed substance immediately to spiral separator. If there are some bigger stones in deep locations, can consider use trommel display screen to separate out particles +2mm
2). Spiral separator: use two-phases spiral separator, very first phase is for tough concentration, the middling from 1st-stage will go to second-stage to focus again to get high recovery ratio.
3). Following two phases spirals operating, it get large minerals concentrates. Then, to begin with use our manufacturing facility unique designed 4 rollers wet magnetic separator to get substantial quality iron ore and titanium ore, and also independent out monazite ore and other weak magnetic ore.
4). Zircon and rutile other non-magnetic minerals goes to shaking desk for concentration, also use two stages shaking desk for acquiring increased concentration influence.
five). soon after the electrostatic separator, can get rutile and other minerals, maybe still including some magnetic minerals, so use a large depth dry procedure magnetic separator to remove the magnetic minerals once again, the zircon will be far more large quality up to sixty six% for sale a very good value.
We style different process flowchart is dependent on customer’s real mining issue.
Some very hot selling equipments information as underneath,
1). Spiral Separator (Spiral Chute)
Usage:
1. Rutile, ilmenite and zircon concentration
two. Iron ore, chromite and manganese beneficiation
three. Tin, tantalum and ore focus
4. Gold, indigenous copper and base metallic restoration
5. Silica sands processing
six. Titano-magnetite focus
Feature & Benefits:
Reasonable framework and modest occupation area
Substantial restoration, large efficiency, and exact separation,
Gentle in weight, rust and corrosion resistant
Easy set up and Small maintenance specifications
Low operating cost and extended functioning lifestyle
CZPT working with minimum operator focus
Strong adaptability to fluctuation of feeding volume, density, measurement and grade
Specification of Spiral Separator
| Model | 5LL-1500 | 5LL-1200 | 5LL-900 | 5LL-600 | 5LL-four hundred | |
| Outside dia(mm) | 1500 | 1200 | 900 | 600 | 400 | |
| pitch(mm) | 540,720 | 900,720,540 | 675,540,405 | 450,360,270 | 240,a hundred and eighty | |
| Pitch Dia Ratio | .75,.six,.45 | .75,.6,.forty five | .seventy five,.six,.forty five | .seventy five,.six,.45 | .6,.45 | |
| Lateral slope | 9° | 9° | 9° | 9° | 9° | |
| Highest starts off per column | 4-two | 4-two | 4-2 | 3-two | two-one | |
| Max Feeding Size(mm) | 3 | 3 | three | 3 | three | |
| Feeding Density(%) | twenty five-fifty five | 25-55 | twenty five-55 | twenty five-fifty five | 25-fifty five | |
| Capacity(T/H) | 8-6 | four-six | 2-3 | .eight-1.two | .15-.two | |
| External Measurement |
Duration(mm) | 1560 | 1360 | 1060 | seven hundred | 460 |
| Width(mm) | 1560 | 1360 | 1060 | 700 | 460 | |
| Peak(mm) | 5230 | 5230 | 4000 | 2600 | 1500 | |
| Weight (Kg) | 800 | 600 | four hundred | 150 | 50 | |
two). Massive method potential CNC Jig.
Feeding measurement: can take care of any -30mm resources(<30mm).
Approach capacity:30 tons per hour for each set.
CNC adjust stroke and frequency, it is effortless to deal with the process pace and ability.
3 chambers per established with only one particular piece 7.5kw electrical motor, much less electric powered intake!
three). Classic Sawtooth Wave Jig
| Jig separator belongs to gravity-based mostly equipments, which can different mineral based on differing of certain gravity. Saw-tooth wave jig is mostly consist of 3 areas: Major frame, driving established and jigging chamber.
The gadget is suited for sorting ferrous and nonferrous metals, chemicals, building and metallurgical factors of experimental study. |
Doing work Theory Of Jig Device
| Jigs a variety of energy conserving gravity equipment improvement and enhanced on the basis of standard jigs in accordance to the the oretic layering regulation of jig beds. Their jigging pulsation curves just take the shape of sawtooth waveform which receives the ascending water to travel much more speedily than the descending water. The ascending time is quick while the descending time is prolonged. The dilemma that the ascending descending drinking water circulation and action time produced by sine wave and pulsation wave are the same is solved. The looseness of bed is strengthened and suction function is alleviated so that the weighty ore grains in the minerals are ready to precipitate totally and the sorting ratio ability and recovery charge of tools are mainly improved. |
Specification of classic sawtooth wave jig
| Design | Chamber | Highest Feeding size(mm) |
H2o added m3/t |
Pressure of water Mpa |
Capability t/h |
Motor power kw |
Dimension mm |
Excess weight kg |
|
| shape | region(mtwo) | ||||||||
| JT0.fifty seven-one | Ladder | .fifty seven | 6 | 1-three | >=.five | one-two.5 | one.5 | 1550x780x1530 | 610 |
| JT1-one | Ladder | one.04 | 10 | 1-3 | 2-4 | 2.2 | 2270x1110x1890 | 900 | |
| JT1.five-two | Rect | one.fifty three | 10 | one-2 | 3-eight | three | 3200x1550x2050 | 1520 | |
| JT2-2 | Rect | two.28 | 10 | 1-three | four-8 | three | 3225x1550x2050 | 1640 | |
| JT3-1 | Ladder | 3.3 | ten | 1-three | six-ten | 5.5 | 3180x2000x2600 | 3260 | |
| JT4-2 | Rect | four.33 | 30 | 1-3 | ten-15 | 7.5 | 3600x1850x2600 | 4600 | |
| JT5-two | Ladder | four.86 | 10 | one-three | ten-fifteen | seven.5 | 3600x2000x2600 | 4500 | |
| JT1.five-2S | Rect | one.fifty three | thirty | 1-three | three-8 | 1.5×2 | 3200x1550x2050 | 1590 | |
| JT2-2S | Rect | 2.28 | 30 | 1-3 | 4-eight | 3×2 | 3225x1550x2050 | 1700 | |
| JT3-2S | Rect | three | 30 | 1-3 | six-fifteen | five.5×2 | 3560x2030x2600 | 3260 | |
| JT4-2S | Rect | four.33 | 30 | 1-three | ten-20 | 4×2 | 3600x1850x2600 | 4660 | |
| JT5-2S | Ladder | four.86 | thirty | 1-3 | ten-twenty | 5.5×2 | 3600x2000x2600 | 4700 | |
| JT6-3S | Rect | 6 | 30 | 1-three | 15-thirty | 7.5×2 | 4600x2000x2600 | 5900 | |
4). CZPT Radial Jig
Descriptions
CZPT radial jig has been extensively utilised as roughing separation products to pick ore this sort of as alluvial gold, tin, diamond, tungsten, manganese and hematite.
CZPT radial jig is produced from circular jig. It’s composed of two components: push and tank. The push is mechanical hydraulic variety, the energy is supplied by motor by way of the transmission mechanism permit the output shaft of the gear reducer drives the cam rotation, the cam pushes the piston of every single learn cylinder make periodic reciprocating motion, which converts electrical energy into mechanical power and then into hydraulic vitality. Via hydraulic pipes and all kinds of valves permit the shifting cylinder drives the cone of jig up and down fluctuation.
CZPT radial jig adopts electromagnetic speed regulating asynchronous motor to recognize the frequency adjustment, it is a step-considerably less adjustment and the adjustable variety of jig frequency is -90 times for each moment.
CZPT radial jig has many benefits in contrast with the numerous jig machines: Huge jigging location, big capacity since the jig tank is supporter-shaped, it is beneficial to recuperate good particle supplies Compact structure, central feeding and modest distribution area, suitable for use on dredger Due to the fact of the hydraulic drive, the transmission mechanism is simplified and saving electrical power. The total electrical power of the same procedure ability is only eleven.six Kw, preserving about fifty five% electricity than the typical jig machine in the exact same focus location. The pulsation curve is approximation noticed-tooth curve, not only conducive to recuperate good heavy minerals, also conserving a large number of make-up water, the make-up water is about a quarter of the ordinary jig.
Rewards and Qualities
- Large capacity, considerably less land profession, extensive get better variety on dimension
- Large concentrating ratio and substantial restoration
- Effortless to install, work and keep
- The pulsation curve is noticed-tooth wave form aid large mineral to settling
- Preserving h2o 60-70% and conserving electrical power 55% than the ordinary jig
- The pulsation velocity quite easily adjusted by the regulator
- Can attain a good consequence in processing this kind of as placer gold, tungsten, tin, hematite, manganese, barite, and gemstone and many others.
| Chamber | 3 | 4 | 5 | six | seven | eight | 9 | ten | eleven | twelve |
| Jigging spot (mthree) |
9.nine | thirteen.2 | 16.five | 19.eight | 23.1 | 26.4 | 29.7 | three.3 | 36.three | 39.6 |
| Stroke (mm) |
20. twenty five. 30 | |||||||||
| Frequency of stroke (r/min) |
50-eighty five | |||||||||
| Feeding dimension (mm) |
<25 | |||||||||
| Make-up water (m3/t) |
one-3m3/ton of ore | |||||||||
| Make-up water pressure (MPa) |
≥0.ten | |||||||||
| Potential (t/h) |
fifty-seventy five | 66-one hundred | seventy eight-125 | one hundred-150 | 116-175 | 132-197 | a hundred and fifty-200 | 166-245 | 182-270 | 200-300 |
| Driving motor (Kw) |
five.5 | 7.5 | seven.five | 7.5 | 11 | 11 | eleven | 15 | fifteen | 22 |
| hydraulic power unit (Kw) |
.fifty five | |||||||||
| Excess weight (kg) |
6000 | 8000 | ten thousand | 12500 | 14200 | 15800 | 17500 | 18000 | 19200 | 21000 |
5). Shaking Table:
Shaking desk for sale is a single of the primary equipments of gravity focus. Gravity Focus Equipment is not only commonly applied on separating tungsten, the tin, the tantalum niobium and other rare metals and the noble steel ore. Also extensively utilized in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc. The shaker efficient recycling granularity scope is 2-.037 millimeters.
Functioning Theory
The doing work basic principle of shaking desk for sale is to use the combined action of the specific gravity distinction of sorted minerals, alternating motion of bed surface area, and transverse indirect drinking water movement and riffle (or notch groove), to permit loose layering of ores on the bed surface and enthusiast-formed zoning. Then distinct merchandise can be created.
Characteristics:
1.High restoration ratio
two.Prolonged functioning daily life because of to new technology.
Spcification of Shaking Table
| Design | 6s-7.six | 6s-4.08 | 6s-1.ninety five | 6s-.5 | ||||
| Deck type | Coarse ore deck | Fine sand deck | Slime deck | |||||
| Benefication Area(m2) | seven.6 | seven.6 | seven.6 | four.08 | one.ninety five | .5 | ||
| Deck size | Duration(mm) | 4450 | 4450 | 4450 | 3000 | 2100 | 1100 | |
| Transmission end width (mm) | 1855 | 1855 | 1855 | 1320 | 1050 | 500 | ||
| Concentrate end width (mm) | 1546 | 1546 | 1546 | 110 | 850 | 430 | ||
| Maximum feeding size(mm) | 2 | .5 | .fifteen | Sand -2 Slime-.1 | Sand -2 Slime-.074 | Sand -2 Slime-.074 | ||
| Feeding amount | .8-1.5ton/h | .8-one.5ton/h | .eight-one.5ton/h | .4-one.5t/h | .3-.8t/h | .05-.2t/h | ||
| Feeding density(%) | twenty five-thirty | 20-25 | 15-twenty five | ten-thirty | ||||
| Stroke(mm) | sixteen-22 | eleven-16 | 8-16 | 6-30 | twelve-28 | 9-17 | ||
| Frequency(F) | forty five-220 | 53-250 | sixty-280 | 210-320 | 250-450 | 280-460 | ||
| Water added | one-3t/h | one-3t/h | one-3t/h | .4-2t/h | .two-1t/h | .1-.5t/h | ||
| Transverse slope of deck | 2°30-4°30 | 1°30-3°30 | 1°-2° | -10° | -8° | -10° | ||
| Longitudinal slope of deck | 1.four | .92 | — | — | — | — | ||
| Cross-section shape of deck | rectangular | noticed-tooth | triangle | — | — | — | ||
| Motor power(kw) | one.1 | .fifty five | ||||||
| Transmission mechanism | Eccentric linkage | |||||||
six). Higher Pressure Electrostatic Separator and ARC Plate Separator
High stress electrostatic separator is meant for dry separation of minerals dependent on the electrical conductivity distinction by making use of substantial voltage electrical field.
CZPT Technical specs
• Separation Voltage: maximum 60kV
• Feed Particle Size: ~2.0mm
• Drum Rotating Velocity (Drum variety): 30~300 r/min
Product Type
For Mineral and Recycle Business
• Drum Kind Large Pressure Electrostatic Separator – GES sequence
• Arc Plate/Sieve Plate electrostatic Separator – GAC sequence
Common Software
Minerals business, recycling market and fly ash.
It is widely utilised for independent ilmenite, zircon, rutile, gold, copper, leucoxene, hematite, cassiterite, chromite, columbite, aluminum, monazite, quartz, feldspar, scheelite, barite, staurolite, kyanite, sillimanite, garnet, chopped wire, plastic, digital scrap, plastic bottle, recycling, metallic, non metallic, laptop cable, decarburization of fly ash, caron enrichment of fly ash…
Specification and designs:
| Product | CZPT-ES1 | CZPT-ES2 | CZPT-ES3 | CZPT-ES4 | CZPT-ES5 | CZPT-ES6 | CZPT-ES7 | CZPT-ES8 |
| Rollers qt | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs | 4pcs | 4pcs | 4pcs |
| Roller pace | -800r/min | -800r/min | -800r/min | -800r/min | -500r/min | -500r/min | -500r/min | -500r/min |
| Working voltage | -45kv | -45kv | -45kv | -45kv | -45kv | -60kv | -60kv | -60kv |
| Feed dimension | -2mm | -2mm | -2mm | -2mm | -2mm | -2mm | -2mm | -2mm |
| Capacity | .three-1t/h | .5-2t/h | one-two.5t/h | 1-3t/h | two-3t/h | 1-4t/h | 2-5t/h | four-8t/h |
7). Damp kind magnetic separator & High intensity dry kind magnetic separator
Our manufacturing unit create both Wet kind magnetic separator & Dry variety magnetic separator
Both soaked type and dry typte magnetic separator’s magnetic field intensity from 800 gauss up to 15000 gausss.
It is very great to separate out robust magnetic iron ore, ilmenite, titanium, hematile, monazite, tin, zircon and other weak magnetic ore.
(we make distinct rollers, this sort of as one particular roller, two rollers, 3 rollers, 4 rollers…):
Our organization & CZPTers Checking out
HangCZPT CZPT Mining CZPT Co., Ltd is an specialist company of mining equipment in China. Our firm is located in Xihu (West Lake) Dis. CZPT Zone, Xihu (West Lake) Dis. county, ZheJiang province, masking an area of over 30000 sq. meters, having more than 30 sets of weighty processing equipment and with an yearly outpurt of more than 2000 sets of mining equipment.
— PRE-SALE Provider —
1.Based on clients’ request and price range, CZPT professionals will strictly make productive, trustworthy remedies accordingly
two.Mine sample testing is CZPT, we welcome the client ship the sample to you for testing by courier, or, the consumer take the sample to our manufacturing unit for tests
3. Style and give the full processing flowchart
4. Layout & manufacturer products in accordance to clients’ demands.
— After-SALE Services —
one.Pre-check out and check the goods ahead of supply
two.Produce the entire plant style for our clients which which includes infrastructure, electrical program and pipeline technique design
3.Trace the standing of the shipping and delivery right up until the merchandise received
4.Put together needed documents to permit clientele pass customized clearance
5.Dispatch experts to have out beneath service on internet site:
one) Set up & debug of the equipment
2) Teach the first-line operators & specialized staff
3) Have out any other service clients might need
6. Provide technical exchanging & spare elements for existence-long phrase
— 1 End Answer —
one.CZPTting by running the mineral beneficiation experiment. To give our consumers with the ideal remedy accordingly
2.Besides offer the flowchart style & products, we also give the infrastructure style CZPTal & pipeline program layout, and so on. To help our consumers complete the design and style of the complete plant
3.Following the set up, debugging of the equipment, the formal creation will also be guiding by our skilled engineers on web site, to assure the output minerals properly fulfill your demands.
FAQ
Q: What Data ought to customers give to us in get to allow we supply you with successful & appropriate quotation and support.
A:1). What variety is the mining? Is it rock stone? or it is sand?
two). If rock stone,What is the general particle dimension(mm) of the raw ore?
three). What is the dealing with capacity(tons for every hour) you program to perform with?
four).What is the aspects of the uncooked ore? How considerably p.c % of every single minerals?
Q: Can we deliver the mineral samples to your business, let your company run the ore-dressing experiments examination for us?
A: Sure, we can operate the ore-dressing experiments for our consumers. Soon after the test, we will primarily based on the results to give you the affordable flowchart, suitable solution and equipments selection. and so forth.
Q: How lengthy is the warrenty of your equipments? Does your firm offer the spare components?
A: The warranty period of CZPT equipments is one particular 12 months. And of system we will supply the spare elements for you for existence-long time at least expensive price.
Q: If i require the total mineral processing line. is CZPT capable to help us create it?
A: Indeed, we can help you merge a complete mineral processing line. and give you relevant skilled advices as extended as you need to have.
There is a abundant knowledge engineer staff of us. we experienced currently create numerous mining tasks in China & Abroad. You can imagine our good quality and provider.
Welcome to visit our manufacturing facility in your free time!
